0423 979 990 Plan your project

The Energy Journal

Solar upgrades
Solar upgrades

Solar inverter showing an error? What to check before you call

A red light or error code on your solar inverter is a prompt to investigate, not proof the system needs replacing. Here is what you can safely check, what to record, and what an electrician will test.

Mounting rails and module electronics prepared on a metal roof

Start with safety

Your inverter and the cables between it and the panels can carry dangerous voltage, even when the grid is off. Never open the inverter, remove covers or disconnect cables yourself. If you notice a burning smell, scorch marks, smoke, water inside the enclosure or damaged wiring, follow the shutdown procedure printed on the system's label or in the manufacturer's manual and call an electrician.

Everything below is observation only: reading displays, checking your app and noting what you see.

Read the message, not just the light

Most inverters show a status light plus a code or message on the screen or in the monitoring app. Write the exact code down, or take a photo. The same colour light can mean very different things depending on the manufacturer, so the code and the inverter's brand and model are what an electrician needs.

Check whether the message repeats or appeared once. A single event during a storm or a grid disturbance is different from a fault that returns every morning.

Separate a monitoring problem from a generation problem

If your app shows no data, the inverter may still be generating. Monitoring often stops because of a changed Wi-Fi password, a new router or a disconnected communications device. Look at the inverter's own display: if it shows power being produced during the day, the panels and inverter may be working while only the reporting has dropped out.

If the display is blank during daylight, or shows zero output on a sunny day, that points to a generation problem worth booking in.

Look at the history, not one bad day

Lower generation can come from weather, the season, new shade from trees or neighbouring buildings, dirt on the panels, or a fault in part of the array. Compare similar days across months or years in your monitoring history rather than reacting to a single cloudy day.

A gradual drop over months suggests something different from a sudden fall to zero, and that difference helps an electrician narrow down where to test.

Repair, replace or upgrade?

Some faults are resolved by repairing a connection or replacing a component; others mean the inverter has reached the end of its life. A replacement is also a chance to reconsider the system: a battery-ready or hybrid inverter may suit if storage is in your plans, but compatibility depends on the existing panels, wiring and connection requirements.

Testing should come before any recommendation. Be cautious of advice to replace a whole system based only on a photo of an error code.

What to send when you book

A photo of the inverter label showing brand and model, the error code or message, roughly when the system was installed, a screenshot of recent monitoring history if you have it, and a photo of your switchboard. With these, the first visit can focus on testing rather than identifying equipment.

YOUR QUESTIONS

Quick answers

Is it safe to keep using power while the inverter shows an error?

Your home normally continues to draw power from the grid. If you see signs of heat, burning, water or damaged cables, follow the shutdown procedure on the system label and call an electrician rather than waiting.

Can you look at a system another company installed?

Yes. We assess existing systems, including installations by other contractors, subject to their condition and compliance.

Does a blank monitoring app mean the system has stopped?

Not necessarily. Check the inverter's own display during daylight. Monitoring often stops because of a Wi-Fi or router change while generation continues.

About the author

The Pro Electric Group team

Local electricians based in Clyde North, designing and installing solar, battery and EV charging systems across Melbourne. Guides are written from our installation work and link to official sources.

Meet the team
02

Out in the field

Our installations

Work we can show you.

Photographed on real jobs by our own electricians. Ask for examples closest to your property during the consultation.

03

Keep exploring

Related services

YOUR NEXT STEP

Get your system working harder.

Tell us about your property or existing system. A local electrician reviews every enquiry and can share examples of similar work.

TELL US ABOUT YOUR PROJECT

Let’s start a conversation.

Share what you know about your property or business. You can add a recent electricity bill in step 2 if you have one handy.

  • 4.7 ★ Google rating, 12 reviews
  • Local electricians, Clyde North
  • No obligation. Details used only to respond

1What can we help with?
2About your property

All optional. Answer what you know; it helps us prepare before we call.

Property type (optional)
Roof type (optional)
Storeys (optional)
Power supply (optional)
Main goal for storage (optional)
Existing system age (optional)
What would you like to change? (optional)
Where you park (optional)
Can you access interval (smart meter) data? (optional)
Is mains power available at the property? (optional)
When would you like to go ahead? (optional)

Share the system’s approximate age, the issue or improvement you have in mind and any planned roof works.

3How can we reach you?
Best way to reach you (optional)