Two ways to connect a battery
Solar panels produce direct current (DC). Your home and the grid use alternating current (AC). An inverter converts between them, and where the battery joins that chain is the difference between the two approaches.
In an AC-coupled system, the battery has its own inverter and connects on the AC side, alongside your existing solar inverter. In a DC-coupled system, the panels and battery share one hybrid inverter, and the battery stores energy before it is converted to AC.
When AC coupling tends to suit
If your existing solar inverter is working well and has useful life left, AC coupling usually lets it stay. The battery system is added beside it, which can make it a practical retrofit for established systems.
Because energy that is stored and later used is converted more than once, there are conversion losses to consider. Manufacturers publish efficiency figures, and the difference in your situation is part of what a proposal should explain.
When DC coupling tends to suit
If your inverter is old, failing or undersized for a planned panel expansion, replacing it with a hybrid inverter and adding a compatible battery can be the cleaner design. It is often the approach for systems being upgraded at the same time.
A hybrid inverter label does not guarantee compatibility with every battery. The battery must appear on the inverter manufacturer's compatibility list, and the design must suit your panels' voltage and current.
Backup is a separate decision
Both approaches can support blackout backup with the right equipment, but backup is never automatic. It depends on the battery and inverter, any additional gateway or changeover hardware, and which circuits are connected to the backed-up supply. Decide which loads matter — fridge, lights, internet, a well pump — before comparing quotes.
Phase, switchboard and approvals
Whether your home has single-phase or three-phase supply affects which batteries and inverters suit. Your switchboard may need space or protection upgrades, and connection settings must follow your electricity distributor's requirements. These items often explain differences between quotes.
What to check first
Take a photo of your solar inverter's label, note roughly when the system was installed, count the panels if you can, and photograph your switchboard. Those details are enough for an initial compatibility review before anyone visits.
Quick answers
Do I have to replace my solar inverter to add a battery?
Not always. With AC coupling the existing inverter often stays. Replacement is more likely if it is ageing, faulty or not suited to the battery design you want.
Is DC coupling always more efficient?
It can involve fewer conversions for stored solar energy, but the result depends on the specific equipment. Compare the manufacturers' published efficiency figures for the proposed products.
Will a retrofitted battery keep my power on in a blackout?
Only if the system is designed and installed for backup. Ask which circuits will be backed up and what extra equipment that needs.
0423 979 990
Plan your project









