0423 979 990 Plan your project

The Energy Journal

Battery retrofits
Battery retrofits

AC-coupled vs DC-coupled batteries: adding storage to existing solar

There are two common ways to add a home battery to solar you already have. Which one fits depends mostly on your existing inverter, its age and whether you want backup during blackouts.

Existing solar panels across a terracotta tiled roof

Two ways to connect a battery

Solar panels produce direct current (DC). Your home and the grid use alternating current (AC). An inverter converts between them, and where the battery joins that chain is the difference between the two approaches.

In an AC-coupled system, the battery has its own inverter and connects on the AC side, alongside your existing solar inverter. In a DC-coupled system, the panels and battery share one hybrid inverter, and the battery stores energy before it is converted to AC.

When AC coupling tends to suit

If your existing solar inverter is working well and has useful life left, AC coupling usually lets it stay. The battery system is added beside it, which can make it a practical retrofit for established systems.

Because energy that is stored and later used is converted more than once, there are conversion losses to consider. Manufacturers publish efficiency figures, and the difference in your situation is part of what a proposal should explain.

When DC coupling tends to suit

If your inverter is old, failing or undersized for a planned panel expansion, replacing it with a hybrid inverter and adding a compatible battery can be the cleaner design. It is often the approach for systems being upgraded at the same time.

A hybrid inverter label does not guarantee compatibility with every battery. The battery must appear on the inverter manufacturer's compatibility list, and the design must suit your panels' voltage and current.

Backup is a separate decision

Both approaches can support blackout backup with the right equipment, but backup is never automatic. It depends on the battery and inverter, any additional gateway or changeover hardware, and which circuits are connected to the backed-up supply. Decide which loads matter — fridge, lights, internet, a well pump — before comparing quotes.

Phase, switchboard and approvals

Whether your home has single-phase or three-phase supply affects which batteries and inverters suit. Your switchboard may need space or protection upgrades, and connection settings must follow your electricity distributor's requirements. These items often explain differences between quotes.

What to check first

Take a photo of your solar inverter's label, note roughly when the system was installed, count the panels if you can, and photograph your switchboard. Those details are enough for an initial compatibility review before anyone visits.

YOUR QUESTIONS

Quick answers

Do I have to replace my solar inverter to add a battery?

Not always. With AC coupling the existing inverter often stays. Replacement is more likely if it is ageing, faulty or not suited to the battery design you want.

Is DC coupling always more efficient?

It can involve fewer conversions for stored solar energy, but the result depends on the specific equipment. Compare the manufacturers' published efficiency figures for the proposed products.

Will a retrofitted battery keep my power on in a blackout?

Only if the system is designed and installed for backup. Ask which circuits will be backed up and what extra equipment that needs.

About the author

The Pro Electric Group team

Local electricians based in Clyde North, designing and installing solar, battery and EV charging systems across Melbourne. Guides are written from our installation work and link to official sources.

Meet the team
01

From the range

Batteries we install
03

Out in the field

Our installations

Work we can show you.

Photographed on real jobs by our own electricians. Ask for examples closest to your property during the consultation.

04

Keep exploring

Related services

YOUR NEXT STEP

Check your solar for storage.

Tell us about your property or existing system. A local electrician reviews every enquiry and can share examples of similar work.

TELL US ABOUT YOUR PROJECT

Let’s start a conversation.

Share what you know about your property or business. You can add a recent electricity bill in step 2 if you have one handy.

  • 4.7 ★ Google rating, 12 reviews
  • Local electricians, Clyde North
  • No obligation. Details used only to respond

1What can we help with?
2About your property

All optional. Answer what you know; it helps us prepare before we call.

Property type (optional)
Roof type (optional)
Storeys (optional)
Power supply (optional)
Main goal for storage (optional)
Existing system age (optional)
What would you like to change? (optional)
Where you park (optional)
Can you access interval (smart meter) data? (optional)
Is mains power available at the property? (optional)
When would you like to go ahead? (optional)

If available, share the inverter make and model, system age, and whether your priority is evening use, backup power or both.

3How can we reach you?
Best way to reach you (optional)