Hamid Eftekharian
Google review“Excellent experience with Pro Electric Company! Farid and his professional team were punctual, knowledgeable, and did a very clean and high-quality solar and battery installation.”View on Google
0423 979 990
Plan your project
Clyde North, Victoria 3978
Our Clyde North electricians design and install rooftop solar for local homes. This page covers what is specific to Clyde North: how large a system the AusNet network will approve, what an export limit means for your savings, and how to plan solar for a home that is still being built.
Updated

Local notes
Good to know in Clyde NorthA solar system should fit the roof it sits on and the way the household uses power. We look at the direction and pitch of each roof face, shading from neighbouring homes, trees and antennas, the switchboard, and your electricity bills before we suggest a layout.
Most Clyde North homes are separate houses, so there is usually more than one roof face to work with. We explain which faces we would use and why, and you can compare the panels we install in our solar panel range.
AusNet measures a system by its inverter capacity, not by the total of its panels, so the two numbers on your quote can differ. For a home on single-phase power, AusNet approves up to 10 kW of total inverter capacity automatically. A home on three-phase power can have up to 30 kW across the three phases.
Any battery inverter counts toward that total. If you want a battery now or later, say so at the start, because it changes which inverter makes sense. Anything above the automatic limit needs a manual assessment by AusNet, which AusNet charges for.
The export limit is the most power your system may send to the grid at one time. Under automatic approval it is up to 5 kW per phase, and AusNet sets the figure for your address when we apply. It depends on the capacity available on your local substation at that time.
An export limit does not stop your panels powering your home. It only caps what is sent out when you are producing more than you use. We size the system around your daytime use, and we can plan for a battery or an EV charger to take up the surplus.
If you are building in one of the Clyde North estates, plan solar before handover. Victoria has required all-electric connections for new homes that need a planning permit since 1 January 2024, and every new home must be all-electric from 1 January 2027. An all-electric home runs its hot water, heating and cooking on electricity, so daytime solar has more to do.
Ask us early about the supply to the house, space in the switchboard, and a cable path for a future battery or car charger. Solar Victoria’s solar panel rebate is open to owners of homes under construction who meet its conditions, and it must be approved before the system is installed. Our rebate guide has the details.
Some new homes come with a solar system already on the roof. If yours did, we can test what it produces, compare that with what your household uses, and tell you plainly whether it is worth changing.
Options include adding panels, replacing the inverter or adding storage. See solar system upgrades and home batteries in Clyde North.
First we apply to AusNet for approval and receive your export limit. AusNet generally allows 65 business days from accepting its offer to complete the installation, so we book the work inside that window.
After installation we send the completion paperwork to your electricity retailer. The retailer asks AusNet to reconfigure your meter for solar, and the system stays switched off until that is done. Then we set up monitoring and walk you through the system at handover.
The facts on this page were checked on 13 November 2026 against these sources.
Keep exploring
Services in Clyde NorthOut in the field
Our installation workPhotographed on real jobs by our own electricians. Ask for examples closest to your property during the consultation.
A clear way forward
How it worksUsage, roof type and plans for a battery or EV shape the design.
Orientation, shading and network limits decide panel and inverter choice.
Mounting, cabling and switchboard work by our electricians.
Commissioning, paperwork and monitoring set up with you.
In their words
Google reviews“Excellent experience with Pro Electric Company! Farid and his professional team were punctual, knowledgeable, and did a very clean and high-quality solar and battery installation.”View on Google
“I highly recommend Pro Electrical Group. They recently installed a solar panel system at my home, and I couldnβt be happier with the service. Their pricing was very competitive, and the whole team was professional, respectful, and easy to deal with. The installation was completed quickly and efficiently, and they kept everything clean and tidy throughout the job. Itβs great to see a company that genuinely cares about the quality of their work and their customers. I would definitely recommend Pro Electrical Group to anyone considering solar.”View on Google
“Highly recommended! We received excellent, high-quality service from Pro Electric Group last week during the installation of our Sigenergy battery and solar system in Warranwood. The team was professional, knowledgeable, and efficient throughout the entire process. Weβre very happy with the quality of their work and would definitely recommend Pro Electric Group to anyone considering a solar and battery system.”View on Google
“Farid with his professional team, reliable with strong after installation supports. Overall, a positive experience and highly recommended.”View on Google
“Highly recommend this group because of optimal price, good experience, back ground work on electrical and on time. They made a good job for me, installed battery, I can see them supportive as well.”View on Google
“All sorted out and fixed thank you”View on Google
“The lads from Pro Electric came by to help us with our solar battery installation. They are hard working efficient team of electricians. We will definitely have them back for other electrical needs in the future. Highly recommend.”View on Google
“Farid and the boys went through hell for me ππΎ Erratic Melbourne heavy rain (but with gaps of sunshine to still get the work done) πͺπΎ He was specifically attentive to my tech/spec concerns, even when the contractor wasn't ππΎ Going to him directly next time for all my future needs ππΎ”View on Google
“Farid, from Pro Electric Group installed our Battery system. Farid and his team were extremely professional in their approach, worked hard to complete the installation on time. I have had to call/text Farid a few times after installation and Farid had been very responsive to my messages. Thank you Farid!”View on Google
“Farid and his team were amazing. They installed solar, battery and inverter. Could not have asked for a better team. Left the area clean and tidy.”View on Google
“I recently had a solar and battery system installed by Farid and Pro Electric Group, and the experience was seamless from start to finish.”View on Google
Good questions. Straight answers.
Frequently asked questionsIt depends on your roof and on AusNet's approval. AusNet automatically approves up to 10 kW of inverter capacity on single-phase power and up to 30 kW on three-phase power, and the panel total can differ from the inverter size. We confirm what fits after assessing your roof.
Under AusNet's automatic approval the limit is up to 5 kW per phase. AusNet sets the limit for each address at the time of the application, based on the capacity available locally, so some homes are offered less.
Yes. AusNet requires approval before installation starts. We lodge the application and confirm the design against the limit AusNet approves.
AusNet requires systems under 30 kW to support Victoria's solar emergency backstop, which lets the network turn solar down in an emergency. The inverter needs an internet connection to do that. Without one, AusNet limits the system to 1 kW of export.
The system stays off until your electricity retailer has the paperwork and AusNet has reconfigured the meter. The time this takes is set by the retailer and AusNet, so we send the paperwork as soon as the installation is complete.
The solar panel rebate is available for homes under construction. Solar Victoria's conditions include a combined household taxable income under $150,000, a property value under $3 million and approval before installation, and the rebate must be claimed through an authorised solar retailer.
Yes. Shade on part of an array reduces its output, and the effect changes with the season. We check shading during the assessment and place panels on the roof faces that stay clear, or recommend equipment that limits the loss.
Where we work
Find usOur electricians are based in Clyde North and work across metropolitan Melbourne, particularly the eastern and south-eastern suburbs. Commercial, off-grid and specialist projects in regional Victoria are assessed individually.
Tell us about your property or existing system. A local electrician reviews every enquiry and replies with the next step β no call centre.
ENQUIRY RECEIVED
Prefer to talk now? 0423 979 990