The Melbourne Energy Field Guide
Service 05 / Off-grid systemsOff-Grid Solar & Battery Systems in Melbourne & Victoria
A standalone off-grid system powers a property independently of the electricity grid. Pro Electric Group develops solar and battery solutions around daily consumption, seasonal generation, storage autonomy and starting loads, with generator integration where compatible.
Updated

- Starts with
- An appliance-by-appliance energy assessment
- Designed for
- Winter generation, not summer averages
- Considers
- Backup generation and autonomy
- Across
- Melbourne fringe and regional Victoria
Before you call
Planning toolOff-grid, backup or hybrid: which do you need?
These terms are often confused. Answer two questions to see which system type to discuss first.
Every standalone system is designed from an appliance-level demand assessment and Victorian winter conditions.
How this estimate works
- No mains power available points to a standalone system. Mains available and outages that matter points to backup. Otherwise a grid-connected solar and battery system is usually the first option to compare.
A system type is a starting point; design follows an appliance-level demand assessment and winter conditions.
Go deeper
Field notes
What to knowOff-grid, hybrid and backup mean different things
A standalone off-grid system is independent of the electricity distribution grid. A grid-connected hybrid system combines solar and storage while retaining a grid connection. Battery backup is a capability to supply agreed loads during an outage. The scope and equipment differ, even when all three arrangements use batteries.
Installing a battery does not automatically make an existing home off-grid. Some batteries do not support backup at all; others need additional isolation and control equipment. Understand which arrangement meets your goal before comparing products.
Begin with an appliance and energy-demand assessment
We assess daily energy use in kWh and the power required when several appliances operate at once. Heating, pumps, cooking and machinery can change both the energy requirement and inverter power. Rural homes, farms, off-grid workshops and commercial properties each need a specific load assessment, including seasonal occupancy and future equipment.
Storage autonomy describes how long the usable battery energy can support an agreed load when generation is limited. A simple energy calculation is only a starting point: design must also account for operating limits, conversion losses and reserve requirements.
Design around Victorian winter conditions
Summer production is not a reliable guide to year-round independence. Shorter winter days, shading and runs of cloudy weather affect how much energy can be replenished. The array and battery need to be assessed together for the property’s conditions.
Where suitable, the design can incorporate diesel or petrol generation, automatic or manual operation and generator-assisted battery charging. Three-phase generator integration is subject to generator, inverter and control compatibility. Backup generation can support the system during prolonged low-solar periods; it does not replace a properly assessed load and storage design.
Equipment selection is a system decision
An off-grid inverter must be suitable for standalone operation and the required continuous and starting loads. Battery usable capacity, discharge capability, operating environment and monitoring also influence the design.
Three-phase pumps, motor starting and equipment using variable frequency drives require particular attention to inverter overload capability and load behaviour. We assess these requirements rather than assuming any three-phase inverter will operate every load. Two-phase and unusual supplies need individual engineering and manufacturer assessment.
What a standalone installation process should include
Our assessment establishes demand, site conditions, equipment placement and the alternatives to standalone supply. The proposal should define the operating assumptions, storage autonomy, generator arrangements where included and responsibility for each component.
The agreed project scope includes installation and commissioning arrangements, applicable inspection coordination, documentation and user handover. We provide system monitoring support, troubleshooting and after-sales technical assistance. Maintenance contracts, remote monitoring services and response times are agreed separately.
Costs and possible incentives
Array size, battery autonomy, inverter power, site access, cable routes and any generator work affect total cost. Compare complete installed scopes rather than a battery-only price or a single headline capacity.
Some off-grid battery systems can qualify for federal support when the equipment and installation meet the current rules. Eligibility includes off-grid-specific conditions. Confirm these with the Clean Energy Regulator and your installer before proceeding; eligibility and discount amounts are assessed for the proposed system.
Off-grid enquiries in Melbourne and regional Victoria
Pro Electric Group is based in Clyde North and assesses specialist solar projects throughout regional Victoria as well as metropolitan Melbourne. Travel availability and costs depend on the project’s location, size, duration and logistics. Send the property location before arranging work.
We design standalone solar and battery solutions around the property and its loads, with compatible generator integration where required. If your goal is reduced grid use or selected-circuit backup, we can also assess a grid-connected alternative.
Explore our solar panel range, home battery options, installation gallery and local team.
Technical information and incentives
Check the current federal battery requirements, Solar Victoria eligibility and Australian Government solar guidance. Incentives depend on the proposed installation and current rules; ask for the applicable amount and conditions in writing. See our solar and battery rebate guide for a starting point.
Out in the field
Project evidenceWork we can show you.
Photographed on real jobs by our own electricians. Ask for examples closest to your property during the consultation.
A clear way forward
How it works- 01
Energy demand
Appliances, seasons and the loads that must always run.
- 02
Winter design
Array, storage and generator sized for low-sun periods.
- 03
Standalone install
Equipment, protection and earthing to suit the site.
- 04
Operating handover
How to read the system and when to call us.
Good questions. Straight answers.
Frequently asked questionsBefore you choose a system
Does Pro Electric provide standalone off-grid solutions?
Yes. We design and install standalone solar and battery solutions, with compatible generator integration where required. The proposed system, operating limits and support arrangements are confirmed through a site-specific assessment and written scope.
Is a home battery the same as going off-grid?
No. A home battery may operate as part of a grid-connected system. Standalone supply and backup operation depend on the whole system design.
How much storage does an off-grid home need?
It depends on daily energy use, required autonomy, winter generation, battery operating limits and any alternative supply. A site-specific demand assessment is needed.
Can you integrate a backup generator?
Generator integration can be included where the equipment is compatible, including suitable three-phase arrangements. Operation, charging controls, starting loads and ongoing support need to be defined in the project proposal.
Can I disconnect an existing home from the grid?
Do not treat a battery installation as approval to disconnect. Discuss technical feasibility, connection arrangements and costs with a suitably qualified standalone-system designer and the relevant providers.
Are rebates available for off-grid batteries?
Some systems can qualify under federal rules, subject to eligibility and off-grid conditions. Check the current Clean Energy Regulator guidance and obtain written confirmation for the proposed installation.
Keep exploring
Related servicesPlan power that stands alone.
Tell us about your property or existing system. A local electrician reviews every enquiry and replies with the next step — no call centre.
ENQUIRY RECEIVED
Thank you. Your enquiry is with our team.
- We review your detailsA local electrician reads every enquiry, not a call centre.
- We get in touchBy your preferred method, to clarify anything we need.
- Assessment and written quoteIf it suits, we arrange a site assessment and a written quote.
Prefer to talk now? 0423 979 990
0423 979 990
Plan your project


